![]() If you find your site to have a reasonable resource, we highly recommend having an installer make an on-site visit before you start a project to ensure there are no major issues. Note: All wind mapping is an approximated value calculated through complex formulas and correlations. Point D (no color) - 10.1 mph or lower (4.5 m/s or lower) Point A (blue) - 14.5 mph or higher (6.5 m/s or higher) The average annual resource would be expected to be: Refer to our tips in the FAQ section for additional suggestions. ![]() If you find your site has a reasonable resource, we highly recommend having an installer make an on-site visit before you start a project to ensure there are no major issues. Note: All wind mapping is an approximated value calculated through complex formulas and correlations. Some orange areas may also hold potential. The resource in the blue areas (14.5 mph or stronger), would be expected to have the most suitable resource, on average. 30 Meter Wind Mapĭevelopers and others seeking to place utility-scale turbines would reference the 100-meter (328 feet) map (some turbines now reach much higher than this). Locations exhibiting wind speeds above 10 mph at 30 meters high are fairly limited in Pennsylvania. A project placed in an area that is tan, orange, or blue-colored (expected to have a 10+ mph annual average wind speed) would be predicted to perform better than a turbine placed elsewhere (in non-tan, orange, or blue areas). ![]() Small Wind Example: If you are looking to install a small wind turbine, reference the 30-meter map (about 98.4 feet above the surface) for your location. When siting a wind turbine, finding a strong resource to place it in is one of the key factors to a financially successful project. If you find that wind is not suitable at your location, do not fret, consider some alternatives! If you find that your site has a feasible resource, see our FAQs for further considerations. This does not mean they are impossible, but it does mean your motivation must be more than financial for the project to be worthwhile. Wind projects in areas with low wind speeds are generally not profitable. Reference our 100-meter maps above surface level for utility-scale projects. Most utility-scale wind turbines in PA (to date) have been sited in locations with average annual wind speeds of 14.5 mph (6.5 m/s) or greater, although sites with wind speeds of 12 mph to 14 mph may be viable under certain conditions with the use of newer technologies. Reference our 30-meter maps above surface level for small wind projects. It is typically recommended that a small wind turbine be placed in a 10 mph (4.5 m/s) or greater average annual wind speed. Wind speeds vary throughout the day and throughout the year, so the following maps provide a summary that can help you to characterize the resource at your site. Understanding your wind energy resource is critical to developing a successful project. Equal Opportunity, Harassment and Non-Discrimination.School of Health Sciences and Education.
0 Comments
Leave a Reply. |